XT90G Battery Replacement procedure

Step 1
Turn off the device by pressing and holding the power button for 3 seconds.

Step 2
​Using a Phillips head screwdriver, loosen the 2 screws on the back of the device and remove the back cover.

Step 3
Remove the battery by lifting it out from the bottom of the device.

Step 4
​Install the new battery (BL-5C 3.7V 1100mAh) by inserting the contacts side of the battery first then gently pushing the battery downward.

Step 5
​Re-install the back cover by engaging the 2 tabs at the top then pushing down gently until the screws engage. Tighten the 2 screws to secure the back cover.

Step 6
​​Turn the device on by pressing and holding the power button for 3 seconds.

Please dispose of used Li-Io batteries by taking them to your nearest recycling centre. https://recyclingnearyou.com.au/batteries/

WARNING Contains Li-Ion battery Use supplied charger only Recycle used batteries

Do not short circuit Do not dispose in general waste Do not dispose of in fire Do not expose to high temperature Do not puncture or disassemble